force sensor

Some auto-sensing devices, such as landslide force sensor, crack deformation sensor and rain gauge sensor, are laid on the place where the disasters exist, the data collecting-transforming devices and power-supplying devices are also laid as the monitoring program.

依照监测方案，在灾害点现场布设滑坡力传感器、裂缝变形传感器、危岩体位移传感器、雨量计等各种自动装置，数据采集发送以及供电装置。

Reed switch; Proximity sensor; Float Sensor; E-bike Brake Switch; Reed Relay; Flow Switch; Tilt Sensor Switch; Vibration Sensor Switch; Centrifugal Force Sensor Switch.

干簧管； 接近开关； 浮球开关； 电动车刹车开关； 干簧继电器； 水流开关； 角度开关； 震动开关； 离心力开关。

Firstly, a six-axis wrist force sensor using a thin-walled cylinder as detective section is proposed in this paper.

本文首先提出了一种新结构的水下机械手用六维腕力传感器；

This paper advanced the testing method of the two forces and the structure of sensor, according as dynamics theory of the calculation of two-friction factor ( ironing force and push force) advanced by article, the design of push force sensor is very skillful.

按文献[1]提出通过变薄拉深力和冲头顶推力确定两个摩擦因子的力学原理，设计出测试系统，其顶推力传感器设计巧妙，有独到之处。

Research on Joint Force Sensor of a Rehabilitation Hand Exoskeleton for Injured Fingers

创伤手指康复外骨骼手关节力传感器研究

Development of a Micro-gripper Integrating Tri-axial Force Sensor

一种集成三维微力传感器的微夹持器研制

The contact force during impact process was measured by force sensor and data signal processing system in real time.

冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。

Measurement of the surface tension coefficient of liquid with force sensor

用力敏传感器测量液体表面张力系数

A kind of integrated strain gauge is presented, which is fit for the thin shell cylinder type of sensing element to compose the miniature six axis force sensor.

针对薄壁圆筒形弹性体本文提出了一种集成式的电阻应变计，阐述了它与弹性体组成微型六维力/力矩传感器敏感部件的方法，及其设计和制作过程。

Same three-dimensional digital shot dynamometry system as size, weight and international standard shots for male and female putter was developed. The core was to force sensor of inside resistance strain type.

研制了外形、尺寸、重量与国际标准男、女铅球相同的三维数字测力铅球系统，其核心是内装电阻应变式三维力传感器。

Hydraulic pressure force generator combined with standard force sensor is adopted by calibration system. The main force calibration device is mounted at the back side of the piezoelectric dynamometer.

校准系统采用液压力源发生装置配合标准力传感器的方式。

New developments of self-excitation vibrating-wire sensor technology and new type force sensor for pulling force measurement of anchor cable

振弦传感技术的新进展及新型锚索测力计

Design of Electronic Scale Based on Thick Film Force Sensor

基于厚膜力传感器的电子秤设计

In this paper, on-line dynamic parameter identification based on 6-dimensional wrist force sensor is studied and investigated, and a neural network model of the identification is established, the net's power after learning is the inertial parameters.

本文基于腕力传感器的输出信号，对在线识别机器人操作臂末端的惯性参数的方法进行了分析和研究，并建立了惯性参数在线识别的神经网络模型，网络学习后其权值即为辨识的惯性参数。

Measuring-analyzing device for tri-finger massage based on touch force sensor

基于触力传感器的三指按摩测定分析仪

The Application of New Type Electronic Components to Miniature Five Dimensional Force Sensor for Dextrous Robot Hand

新型电子元件在机器人灵巧手微型五维力传感器中的应用

Surface acoustic wave force sensor

声表面渡（SAW）力传感器

In design of multi-axis force sensor used in underwater robot, the problem how to balance hydraulic pressure must be resolved firstly.

水下机器人用多轴力传感器的设计必须首先解决水压力平衡的问题。

Near-field Optical Microscopy Using High Q Factor Tuning Fork as Force Sensor

高Q值音叉调制近场光学扫描显微镜研究

Piezoelectrical PVDF-foil force sensor and its biting force measurement research

压电薄膜力传感器及其牙咬力的测量应用研究

The facility includes piezoelectric actuator, displacement sensor, force sensor, dynamic and static loading platform, precision positioning stage, image acquisition.

整个实验装置由压电陶瓷制动器、位移检测传感器、微力检测传感器、动静载物台、五维精密定位台、图像采集等主要部件组成。

Development of micro force sensor

小型微力传感器的研制

Performance Analysis of Shearing Force Sensor

剪力传感器性能分析

The structure and the principle of a 3-dimensional micro force sensor is introduced.

3维微力传感器是基于半导体应变测试技术制成的多维力传感器，介绍了它的结构和原理。

Theoretical Design and Output Signal Analysis of the Circular-section I-shaped Beam Shearing Force Sensor

圆截面工字梁剪力传感器理论设计与输出信号分析

Carried out multi-axis force sensor transducer standardization systemic design, debugging emulation test work under the current experimental conditions.

在现有的实验条件下，完成了多维力传感器标定系统的设计、调试及仿真测试工作。

The Design of Force Sensor of Automobile Pedal

汽车踏板力传感器设计

The decoupling experiment is implemented by using a miniature five axes fingertip force sensor and the experimental results show that the method greatly improves the decoupling accuracy in comparison with traditional linear decoupling based on LS ( Least Square).

以研制的微型5维指尖力/力矩传感器为对象进行了解耦实验，结果表明，与基于最小二乘的线性解耦方法相比，提高了解耦精度。

There exists some problems in practical test, i.e. it is hard to measure step force accurately by using force sensor, and it will bring serious errors by replacing the step signal with rectangular pulse.

提出在实际测试中存在的问题：力传感器难以正确测量阶跃力以及利用矩形脉冲代替阶跃进行处理会带来很大的误差。

Development of testing system of warp tension based on optical fiber force sensor

基于光纤力传感器的经纱张力测试系统